Administrator Guide

7. (Optional) Click Advanced Mapping to configure LUN settings, restrict mapping paths, or present the volume as read-only.
8. Click Finish.
Unmap a Volume from a Server
Unmap a volume from a server if the server no longer needs to access the volume.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Storage tab.
3. In the Storage tab navigation pane, select the volume you want to unmap from a server.
4. In the right pane, click Remove Mappings.
The Remove Mappings dialog box opens.
5. Select the server(s) to unmap from the volume, then click OK. If the volume is the destination of a replication and you selected the
mapping to the source Storage Center, a confirmation dialog box appears.
6. If a confirmation dialog box appears:
• Click OK to remove the mapping to the source Storage Center, which might interfere with the replication.
• Click Cancel to keep the mapping to the source Storage Center.
Unmap Multiple Volumes from Servers
Multiple volumes can be unmapped from servers in a single operation.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Storage tab.
3. In the Storage tab navigation pane, select the Volumes node or the folder that contains the volumes.
4. In the right pane, use shift+click and/or control+click to select multiple volumes.
5. Right-click the selection, then select Remove Mappings. The Remove Mappings dialog box appears.
6. Select the volume/server mappings to remove, then click OK. If a volume is the destination of a replication and you selected the
mapping to the source Storage Center, a confirmation dialog box appears.
7. If a confirmation dialog box appears:
• Click OK to remove the mapping to the source Storage Center, which might interfere with the replication.
• Click Cancel to keep the mapping to the source Storage Center.
Promote a Volume Mapping from a Server to a Server Cluster
If a volume is mapped to a server that belongs to a server cluster, you can promote the mapping to the server cluster so that it is mapped
on all servers in the cluster.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Storage tab.
3. In the Storage tab navigation pane, select the volume.
4. In the right pane, click the Mappings tab.
5. In the right pane, select the server for which you want to promote the mapping, then click Promote to Cluster.
The Promote to Cluster dialog box appears.
6. Click OK.
Storage Center Administration
119