Administrator Guide

Modify an Access Filter for a Storage Center
Modify an access filter to change the users or IP addresses it allows.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. In the Summary tab, click Edit Settings.
The Edit Storage Center Settings dialog box opens.
3. Click the IP Filtering tab.
4. Select the access filter that you want to modify, then click Modify Filter.
The Modify IP Filter dialog box opens.
5. Modify the access filter settings as needed. For user interface reference information, click Help.
6. (Optional) Modify the allowed Storage Center user or user privilege level.
• To allow access to a Storage Center user privilege level, select User Privilege Level, then select a privilege level from the drop-
down menu.
• To allow access to an individual Storage Center user, select Specific User, then select a user from the drop-down menu.
7. (Optional) Modify the allowed source IP addresses.
NOTE: If network address translation (NAT) is enabled in your network environment, be sure to specify the IP
address(es) visible to the Storage Center.
• To allow all source IP addresses, select All Hosts.
• To allow access to a specific IP address, select Single IP Address, then type the IP address in the field.
• To allow access to a range of IP addresses, select Range of IP Addresses, then type the first and last IP addresses in the fields.
8. Click OK.
Delete an Access Filter for a Storage Center
Delete an access filter if it is no longer needed or you want to revoke administrative access to the users and IP addresses that the filter
matches.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. In the Summary tab, click Edit Settings.
The Edit Storage Center Settings dialog box opens.
3. Click the IP Filtering tab.
4. Select the access filter that you want to delete, then click Delete Filter.
The Delete IP Filter dialog box opens.
5. Click OK to confirm.
6. Click OK.
View and Delete Access Violations for a Storage Center
View access violations to determine who has unsuccessfully attempted to log in. A maximum of 100 access violations are recorded and
displayed for a Storage Center.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. In the Summary tab, click Edit Settings.
The Edit Storage Center Settings dialog box opens.
3. Click the IP Filtering tab.
4. Click Show Access Violations.
The Show Access Violations dialog box opens.
5. (Optional) Delete access violations.
a) Select the corresponding checkbox for each violation that you want to delete.
b) Click Delete Selected Violations.
A confirmation dialog box opens.
Storage Center Maintenance
221