Administrator Guide

3 In the File System view, select Cluster Maintenance.
4 Click the SNMP tab.
5 In the SNMP MIB Access panel, click Edit Settings. The Modify SNMP MIB Access dialog box opens.
6 In the Read Version eld, type the version you want to change SNMP to.
7 In the Trap Version eld, type the version you want to change SNMP to.
8 Click OK.
Change the SNMP Read-Only Community
Change the read-only community for devices reading SNMP variables from the FluidFS cluster. By default, the read-only community is
FluidFS.
1 In the Storage view, select a FluidFS cluster.
2 Click the File System tab.
3 In the File System view, select Cluster Maintenance.
4 Click the SNMP tab.
5 In the SNMP MIB Access panel, click Edit Settings. The Modify SNMP MIB Access dialog box opens.
6 In the Read Only Community eld, type a read-only community name.
7 Click OK.
Change the SNMP Trap System Location or Contact
Change the system location or contact person for FluidFS cluster-generated SNMP traps. By default, the SNMP trap system location and
contact person are unknown.
1 In the Storage view, select a FluidFS cluster.
2 Click the File System tab.
3 In the File System view, select Cluster Maintenance.
4 Click the SNMP tab.
5 In the SNMP Trap panel, click Modify SNMP Trap. The Modify SNMP Trap Settings dialog box opens.
6 Change the SNMP trap system location or contact:
• To specify a description for the location of the FluidFS cluster, type a location in the System Location eld.
• To specify the name of the SNMP contact person, type a contact name in the System Contact eld.
7 Click OK.
Add or Remove SNMP Trap Recipients
Add or remove hosts that receive the FluidFS cluster-generated SNMP traps.
1 In the Storage view, select a FluidFS cluster.
2 Click the File System tab.
3 In the File System view, select Cluster Maintenance.
4 Click the SNMP tab.
5 In the SNMP Trap panel, click Modify SNMP Trap. The Modify SNMP Trap Settings dialog box opens.
6 Add or remove SNMP trap recipients:
• To add an SNMP trap recipient, type a host name or IP address in the Trap Recipients eld and click Add.
• To remove an SNMP trap recipient, select an SNMP trap recipient and click Remove.
7 Click OK.
FluidFS Administration
367