Administrator Guide
Related links
Managed Replications for Live Volumes
Supported Live Volume with Managed Replication Topologies
Live Volume with Managed Replication Example Conguration
Managed Replication Requirements
Include Active Snapshot Data for an Asynchronous Live Volume
The Active Snapshot represents the current, unfrozen volume data.
1 Click the Replications & Live Volumes view.
2 On the Live Volumes tab, select the Live Volume, then click Edit Settings. The Edit Live Volume dialog box appears.
3 Select or clear the Replicate Active Snapshot check box then, click OK.
Enable or Disable Deduplication for a Live Volume
Deduplication reduces the amount of data transferred and enhances the storage eciency of the remote Storage Center by copying only
the changed portions of the snapshot history on the source volume, rather than all data captured in each snapshot.
1 Click the Replications & Live Volumes view.
2 On the Live Volumes tab, select the Live Volume, then click Edit Settings. The Edit Live Volume dialog box appears.
3 Select or clear the Deduplication check box, then click OK.
Select Dierent QoS Denitions for a Live Volume
Select a dierent QoS denitions for a Live Volume to change how the Live Volume uses bandwidth.
1 Click the Replications & Live Volumes view.
2 On the Live Volumes tab, select the Live Volume, then click Edit Settings. The Edit Live Volume dialog box appears.
3 From the Primary QoS Node drop-down menu, select a QoS denition that will be used for the Live Volume by the primary Storage
Center.
4 From the Secondary QoS Node drop-down menu, select a QoS denition that will be used for the Live Volume by the secondary
Storage Center.
5 Click OK.
Congure a Live Volume to Write Data to the Lowest Tier at the
Destination
The Replicate Storage To Lowest Tier option forces all data written to the destination volume to the lowest storage tier congured for the
volume. By default, this option is enabled for asynchronous Live Volumes.
Prerequisite
The Live Volume must be asynchronous. The Replicate Storage To Lowest Tier option is not available for synchronous Live Volumes.
Steps
1 Click the Replications & Live Volumes view.
2 On the Live Volumes tab, select the Live Volume, then click Edit Settings. The Edit Live Volume dialog box appears.
3 Select the Replicate Storage To Lowest Tier check box.
4 Click OK.
Storage Center Replications and Live Volumes
557