Administrator Guide
3 Click Next.
Customer Installation Authorization
If the storage system is running Storage Center 7.3 or later, customer authorization is required.
1 Type the customer name and title.
2 Click Next.
Set System Information
The Set System Information page allows you to enter Storage Center and storage controller conguration information to use when
connecting to the Storage Center using Storage Manager.
1 Type a descriptive name for the Storage Center in the Storage Center Name eld.
2 Select the Network Conguration Source (Storage Center 7.3 and later).
• DHCP IPv4 – Selected by default. IP addresses will be discovered and assigned.
• Static – Enter static IP addresses manually.
3 If the network conguration source is set to Static:
a Type the system management IPv4 address for the Storage Center in the Virtual Management IPv4 Address eld.
The management IPv4 address is the IP address used to manage the Storage Center and is dierent than a storage controller
IPv4 address.
b Type an IPv4 address for the management port of each storage controller.
NOTE
: The storage controller IPv4 addresses and management IPv4 address must be within the same subnet.
c Type the subnet mask of the management network in the Subnet Mask eld.
d Type the gateway address of the management network in the Gateway IPv4 Address eld.
e Type the domain name of the management network in the Domain Name eld.
f Type the DNS server addresses of the management network in the DNS Server and Secondary DNS Server elds.
4 Click Next.
Set Administrator Information
The Set Administrator Information page allows you to set a new password and an email address for the Admin user.
1 Enter a new password for the default Storage Center administrator user in the New Admin Password and Conrm Password elds.
2 Enter the email address of the default Storage Center administrator user in the Admin Email Address eld.
3 Click Next.
• For a Fibre Channel or SAS storage system, the Conrm Conguration page appears.
• For an iSCSI storage system, the Congure iSCSI Fault Domains page appears.
Conrm the Storage Center Conguration
Make sure that the conguration information shown on the Conrm Conguration page is correct before continuing. If you selected DHCP
IPv4 as the network conguration source, the dynamically assigned IP addresses are displayed on this page.
1 Verify that the Storage Center settings are correct.
2 If the conguration information is correct, click Apply Conguration.
If the conguration information is incorrect, click Back and provide the correct information.
Storage Center Deployment
79