Administrator Guide
8 If you selected SNMP v3, specify the users of SNMP v3 by selecting an existing user or creating a new one.
To create a new user:
a Click Create SNMP v3 User.
The Create SNMP v3 User dialog box opens.
b In the Name eld, type a user name.
c In the Password eld, type a password.
d Select an authentication method from the Authentication Type drop-down menu.
e Select an encryption type from the Encryption Type drop-down menu.
f Click OK.
g Select the user from the SNMP v3 Settings table.
9 Specify settings for the network management system to which Storage Center will send SNMP traps.
a Click Create Trap Destination.
The Create SNMP Trap Destination dialog box opens.
b In the Trap Destination eld, type the host name or IP address of the network management system that is collecting trap
information
c From the Type drop-down menu, select the notication type and the SNMP version of the trap or inform to be sent.
d In the Port eld, type the port number of the network management system.
e To create an SNMP v1 or v2 trap, in the Community String eld, type a password used to allow the Storage Center SNMP
agent to communicate with the network management system.
f To create an SNMP v3 trap, select a user from the SNMP v3 User drop-down menu.
g If you selected SNMP v1 or v2, to apply the changes to SNMP settings to other Storage Centers, check Apply these settings
to other
Storage Centers.
h Click OK.
10 If the SNMP Running status is No, click Start SNMP.
11 Click OK.
Conguring Filters to Restrict Administrative Access
Access lters can be created to selectively allow administrative access to a Storage Center based on IP address, user privilege level, or user
name. When one or more access lters are dened, administrative connections that do not match an access lter are denied.
• Unisphere does not allow you to create an access lter policy that would reject your current administrative connection.
• Access lters apply to new administrative connections only; existing administrative connections are not aected.
NOTE
: For user interface reference information, click Help.
Create an Access Filter for a Storage Center
Create an access lter to explicitly allow administrative connections from a user privilege level, specic user, IP address, or range of IP
addresses.
1 If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane.
2 Click Summary.
The Summary view is displayed.
3 Click (Settings).
The Storage Center Settings dialog box opens.
4 Click the IP Filtering tab.
5 Click Create Filter.
The Create IP Filter dialog box opens
6 Select the Storage Center user or user privilege level to allow.
Storage Center Maintenance
109