Administrator Guide

4. Click the SNMP Server tab.
5. Select the Apply these settings to other Storage Centers check box.
6. Click Apply. The Select Storage Center dialog box appears.
7. Select the check box for each Storage Center to which you want to apply the settings.
8. When you are nished, click OK.
Conguring Storage Center Time Settings
Date and time settings can be congured individually for each Storage Center or applied to multiple Storage Centers.
NOTE: For user interface reference information, click Help.
Set the Date and Time for a Storage Center
Select the time zone, then set the date and time or congure the Storage Center to synchronize with an NTP server.
Prerequisite
The Storage Center must be added to Storage Manager using a Storage Center user with the Administrator privilege.
Steps
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. In the Summary tab, click Edit Settings. The Edit Storage Center Settings dialog box opens.
3. Click the Time Settings tab.
4. From the Region drop-down menu, select the region where the Storage Center is located.
5. From the Time Zone drop-down menu, select the time zone where the Storage Center is located.
6. Set the date and time.
• To set the date and time manually, make sure the Use NTP Server check box is cleared, then set the date and time in the
Current Time elds.
• To congure the Storage Center to synchronize the date and time with a Network Time Protocol server, select the Use
NTP Server check box, then type the host name or IP address of an NTP server in the Server Host or IP Address eld.
7. Click OK.
Apply Date and Time Settings to Multiple Storage Centers
Date and time settings that are assigned to a single Storage Center can be applied to other Storage Centers.
Prerequisite
The Storage Center must be added to Storage Manager using a Storage Center user with the Administrator privilege.
Steps
1. Click the Storage view.
2. In the Storage pane, select the Storage Center that has the settings you want to apply to other Storage Centers.
3. In the Summary tab, click Edit Settings. The Edit Settings dialog box appears.
4. Click the Time tab.
5. Select the Apply these settings to other Storage Centers check box.
6. Click Apply. The Select Storage Center dialog box appears.
7. Select the check box for each Storage Center to which you want to apply the settings.
8. When you are nished, click OK.
Conguring Filters to Restrict Administrative Access
Access lters can be created to selectively allow administrative access to a Storage Center based on IP address, user privilege level,
or user name. When one or more access lters are dened, administrative connections that do not match an access lter are denied.
• Storage Manager does not allow you to create an access lter policy that would reject your current administrative connection.
• Access lters apply to new administrative connections only; existing administrative connections are not aected.
242
Storage Center Maintenance