Administrator Guide

19
FluidFS Monitoring
This section contains information about monitoring the FluidFS cluster. These tasks are performed using the Dell Storage Manager
Client.
Monitoring NAS Appliance Hardware
Storage Manager displays an interactive, graphical representation of the front and rear views of NAS appliances.
Storage Manager also displays the status of the following NAS appliance and NAS controller hardware components:
• Interfaces
• Disks
• Backup power supplies
• Fans
• Power supplies
• Temperature of the components
View the Status of the Interfaces
View the status of the interfaces in a NAS controller.
1. In the Storage view, select a FluidFS cluster.
2. Click the Hardware tab.
3. In the Hardware view, expand Appliances to select an appliance ID and a controller ID.
4. Select Interfaces.
The status of each interface is displayed.
View the Status of the Disks
View the status of the disks in the internal storage device in a NAS controller.
1. Click the Storage view and select a FluidFS cluster.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand Appliances→ Appliance ID → Controller ID , then select Disks. The status of each
disk is displayed in the right pane.
View the Status of a Backup Power Supply
View the status of a backup power supply in a NAS controller.
1. In the Storage view, select a FluidFS cluster.
2. Click the Hardware tab.
3. In the Hardware view, expand Appliances to select an appliance ID and a controller ID.
4. Select Backup Power Supply.
The status of the backup power supply is displayed.
FluidFS Monitoring
461