Administrator Guide

4. Click (Column Filters).
The Filters dialog box opens.
5. Select one or more of the following filter categories:
● Severity
● Last Occurence
● Source
● Message
● Type
6. Select one or more filter values for the selected categories.
7. Click Apply.
8. Click X to close the Filters dialog box.
Select the Date Range of Data Collector Alerts to Display
You can view Data Collector alerts for a specific time period.
Steps
1. If you are connected to a Data Collector and a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
2. From the
MONITORING menu, click Alerts.
The Alerts view is displayed.
3. Click the Data Collector tab from the Alerts view.
4.
Click (Column Filters).
The Filters dialog box opens.
5. Specify a start date and time in the Last Occurrence field.
a. Click the calendar icon and select a start date from the calendar.
b. Click the clock icon and select a start time from the drop-down list.
6. Specify an end date and time in the Last Occurrence field.
a. Click the calendar icon and select a end date from the calendar.
b. Click the clock icon and select a end time from the drop-down list.
7. Click Apply.
8. Click X to close the Filters dialog box.
Configuring Email Alerts for Unisphere Central Events
Unisphere Central can be configured to send automated reports when monitored events occur.
About this task
To configure Unisphere Central to send automated reports by email:
Steps
1. Configure the SMTP server settings on the Data Collector.
2. Add an email address to your user account.
3. Configure email notification settings for your user account.
274
Storage Center Monitoring