Owners Manual

Shutting Down the Storage System

If you are replacing the storage system chassis or rack rails, use the Dell Storage Client to shut down the

storage system.

About this task

CAUTION: Shutting down the storage system results in a system outage.

Steps

1. Select Actions → System → Shutdown/Restart. The Shutdown/Restart dialog box appears.

2. Select Shutdown Controller from the first drop-down menu.

3. Click OK. After the storage system shuts down, unplug the power cables from the power supply/

cooling fan modules.

Replacing the Front Bezel

The front bezel is a cover for the front panel of the storage system.

About this task

The front bezel must be removed from the front panel when replacing hard drives.

Steps

1. Use the system key to unlock the keylock at the left end of the bezel.

2. Lift the release latch next to the keylock.

3. Rotate the left end of the bezel away from the front panel.

4. Unhook the right end of the bezel and pull the bezel away from the storage system.

Figure 9. Replacing the Front Bezel

5. Hook the right end of the replacement bezel onto the front panel of the storage system.

6. Insert the left end of the bezel into the securing slot until the release latch locks into place.

7. Secure the bezel with the keylock.

Replacing SCv2000/SCv2020 Storage System Components