Owners Manual

Figure 19. Front View of the Expansion Enclosure Showing the Failed Hard Drive

8. (Optional) To open a wizard to guide you through the replacement steps, right-click on the failed

hard drive.

Replacing a Hard Drive

Use this procedure to replace a failed hard drive.

About this task

Hard drives can be replaced one at a time without shutting down the storage system.

NOTE: At least one powered drive must remain installed in the primary chassis when multiple disks

are replaced.

Steps

1. Use SupportAssist to send diagnostic data to Dell Technical Support Services.

2. Remove the front bezel.

A solid amber light appears next to the failed hard drive, indicating that the drive is ready to be

removed.

3. Press the release button to open the hard drive carrier release handle.

4. Slide the hard drive out until it is free of the hard drive slot.

Replacing SCv2000/SCv2020 Storage System Components