Users Guide

NFS Export

Use the NFS Export page to specify properties for a NAS datastore.

• Create a New Volume—Select this option to create a new NAS volume.

• Use Existing Volume—When you select this option, the existing NAS volumes are shown. Select a volume from the list.

• Name—NAS datastore name specified on the previous step of the datastore provisioning wizard.

• Size—Type a number and select the unit of measurement from the drop-down menu.

• Create New NAS Volume Folder—Type a name for the new volume folder. By default, this field is filled in with the datastore name

specified in the previous step.

• Use Existing NAS Volume Folder—When you select this option, the existing NAS volume folders are shown. Select a folder from

the list.

• NFS Export Folder Path—A default folder path is preselected based on the NFS datastore name. You can type a different folder

path.

• FluidFS VIP or DNS Name—Type either the IP address or the DNS name of the host to be used for the FluidFS VIP.

Protocol Selection

Use the Protocol Selection page to select the connection protocol for the Dell volume.

The following options are available if Front-End SAS is not supported on the Storage Center selected.

The following options are available if Front-End SAS is supported on the Storage Center selected.

Wizard Page Reference