Administrator Guide
• To create a volume as a replication, select Replication Volume to Another Storage Center.
• To create the volume as a Live Volume, select Create as Live Volume.
16. Click Next.
The Volume Summary page appears.
17. Click Finish.
Create Multiple Volumes Simultaneously Using Single-Step Dialog
If you need to create many volumes, you can streamline the process by creating multiple volumes at a time.
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. Click the Storage tab.
3. In the Storage tab navigation pane, select Volumes.
4. In the right pane, click Create Multiple Volumes. The Create Volume dialog box appears.
5. Use the Create Volume dialog box to congure the base volume parameters.
a. In the Volume Count eld, type the number of volumes to create.
b. In the Base Volume Name eld, type a base name for the volumes. Each volume is named with a combination of the base
name and the volume number.
c. In the Size eld, type a size for the volumes in kilobytes (KB), megabytes (MB), gigabytes (GB), or terabytes (TB).
d. In the Volume Folder pane, select the parent folder for the volumes.
e. In the Notes eld, type any notes you want to associate with these volumes.
f. (Optional) Congure the remaining volume attributes as needed.
• To schedule snapshot creation and expiration for the volume, apply one or more Snapshot Proles by clicking Change
across from Snapshot Proles.
• To map the volume to a server, click Change across from Server.
• If Chargeback is enabled, select the department to charge for storage costs associated with the volume by clicking
Change across from Chargeback Department.
• If Data Reduction is enabled on the Storage Center, select Compression or Deduplication with Compression to enable
Data Reduction on the volume.
• To use specic disk tiers and RAID levels for volume data, select the appropriate Storage Prole from the Storage
Prole drop-down menu. Using the Recommended Storage Prole allows the volume to take full advantage of data
progression.
• If more than one Storage Type is dened on the Storage Center, select the Storage Type to provide storage from the
Storage Type drop-down menu.
• To set a Volume QoS Prole, either accept the default QoS Prole or click Change across from Volume QoS Prole.
Then select a Volume QoS prole from the resulting list, and click OK.
• To set a Group QoS Prole, click Change across from Group QoS Prole. Then select a Group QoS prole from the
resulting list, and click OK.
• To adjust the Read/Write Cache, enter the desired size of the cache.
• To congure Replications and Live Volumes if they are licensed, select Replications and Live Volumes.
g. Click OK. The Create Multiple Volumes dialog box appears and displays the volume you created in the previous step.
6. Use the Create Multiple Volumes dialog box to create additional volumes.
• To add a volume based on a previous volume, select the volume from the list, then click Clone Selected Volume.
• To manually dene another volume, click Add Volume.
• To modify an individual volume, select the volume from the list, then click Edit Volume.
• To remove an individual volume, select the volume from the list, then click Remove Volume.
7. When you are nished, click OK.
110
Storage Center Administration