Administrator Guide
5. Select the HBAs that you want to remove.
6. When you are nished, click OK. If the HBA is used by one or more mapped volumes, a conrmation dialog box opens.
Figure 22. Remove HBAs from Server Conrmation Dialog Box
7. If a conrmation dialog box opens:
• Click Cancel to keep the HBA.
• Click OK to remove the HBA, which might interfere with the mapped volume.
Mapping Volumes to Servers
Map a volume to a server to allow the server to use the volume for storage.
Map a Volume to a Server
Map an existing volume to a server to allow the server to use it.
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. Click the Storage tab.
3. Select the server in the Storage tab navigation pane.
4. In the right pane, click Map Volume to Server. The Map Volume to Server wizard opens.
5. In the Volume navigation tree, select the volume you want to map, then click Next. The wizard advances to the next page.
6. (Optional) Click Advanced Options to congure LUN settings, restrict mapping paths, or present the volume as read-only.
7. When you are done, click Finish.
Unmap One or More Volumes From a Server
If a server no longer uses a volume, you can unmap the volume from the server.
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. Click the Storage tab.
3. Select the server from which to unmap volumes in the Storage tab navigation pane.
4. In the right pane, click Remove Mappings. The Remove Mappings dialog box opens.
5. Select the volumes to unmap from the server.
6. Click OK.
156
Storage Center Server Administration