Administrator Guide

Modify Target Authentication
A PS Series group automatically enables target authentication using a default user name and password. If needed, you can change
these credentials.
1. Click the Storage view.
2. In the Storage pane, select a PS Series group.
3. Click the Storage tab.
4. In the Storage tab navigation pane, select the Access node.
5. In the right pane, click Modify Target Authentication. The Modify Target Authentication dialog box opens.
6. In the Username eld, type a target authentication user name.
7. In the Password eld, type a target authentication password (otherwise known as a CHAP secret).
8. Click OK.
Set the iSCSI Discovery Filter
You can prevent computers from discovering unauthorized targets by enabling the iSCSI discovery lter. If you enable the iSCSI
discovery lter, initiators discover only those targets for which they have the correct access credentials.
1. Click the Storage view.
2. In the Storage pane, select a PS Series group.
3. Click the Storage tab.
4. In the Storage tab navigation pane, select the Access node.
5. In the right pane, click Set iSCSI Filter. The Set iSCSI Filter dialog box opens.
6. To enable the iSCSI discovery lter, select the Prevent unauthorized host from discovery targets checkbox.
To disable the iSCSI discovery lter, clear the Prevent unauthorized host from discovery targets checkbox.
7. Click OK.
Create an Access Policy Group
Access policy groups combine individual access policies together so that they can be managed as a single entity.
1. Click the Storage view.
2. In the Storage pane, select a PS Series group.
3. Click the Storage tab.
4. In the Storage tab navigation pane, select the Access node.
5. In the right pane, click Create Access Policy Group. The Create Access Policy Group dialog box opens.
6. In the Name eld, type a name for the access policy group.
7. (Optional) In the Description eld, type a description for the access policy group.
8. In the Access Policies area, click Add to add access policies to the access policy group.
To remove an access policy from the access policy group, select the access policy and click Remove.
9. Click OK.
Edit an Access Policy Group
After an access policy group is created, you can edit the settings of the access policy group.
1. Click the Storage view.
2. In the Storage pane, select a PS Series group.
3. Click the Storage tab.
4. In the Storage tab navigation pane, expand the Access node and select an access policy group.
5. In the right pane, click Edit Settings. The Edit Access Policy Group dialog box opens.
PS Series Storage Array Administration
213