Administrator Guide

10. In the text box in the IPv4 Addresses area, type the IPv4 addresses of the iSCSI initiators to which you want to provide access
and then click + Add. You can enter a single IP address or a range of IP addresses. IP addresses can also be entered in a comma
separated list.
To remove an IP address from the IPv4 Address area, select the address and click – Remove.
11. Click OK.
Delete an Extended Access Point
You can delete an extended access point if it is no longer needed.
1. Click the Storage view.
2. In the Storage pane, select a PS Series group.
3. Click the Storage tab.
4. In the Storage tab navigation pane, expand the Access node and select an access policy.
5. In the right pane, click Edit Settings. The Edit Access Policy dialog box opens.
6. In the Access Points area, select the access point to delete and click Remove.
7. Click OK.
Add Volumes to an Access Policy
You can select the volumes that you want to associate with an access policy.
1. Click the Storage view.
2. In the Storage pane, select a PS Series group.
3. Click the Storage tab.
4. In the Storage tab navigation pane, expand the Access node and select an access policy.
5. In the right pane, click Add Volumes. The Add Volumes to Access Policy dialog box opens.
6. In the Volumes area, select the checkboxes of the volumes to associate with the access policy.
7. In the Access Policy Targets area, select whether the access policy applies to volumes and snapshots, volumes only, or
snapshots only.
8. Click OK.
Remove Volumes From an Access Policy
You can select the volumes that you want to unassociate from an access policy.
1. Click the Storage view.
2. In the Storage pane, select a PS Series group.
3. Click the Storage tab.
4. In the Storage tab navigation pane, expand the Access node and select an access policy.
5. In the right pane, click Remove Volumes. The Remove Volumes from Access Policy dialog box opens.
6. Select the checkboxes of the volumes to unassociate from the access policy.
7. Click OK.
Delete an Access Policy
You can delete an access policy if it is not in use.
1. Click the Storage view.
2. In the Storage pane, select a PS Series group.
3. Click the Storage tab.
4. In the Storage tab navigation pane, expand the Access node and select the access policy to delete.
5. In the right pane, click Delete. The Delete Access Policy dialog box opens.
6. Click OK.
216
PS Series Storage Array Administration