Administrator Guide

Delete an Access Filter for a Storage Center
Delete an access lter if it is no longer needed or you want to revoke administrative access to the users and IP addresses that the
lter matches.
Prerequisite
The Storage Center must be added to Storage Manager using a Storage Center user with the Administrator privilege.
Steps
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. In the Summary tab, click Edit Settings. The Edit Storage Center Settings dialog box opens.
3. Click the IP Filtering tab.
4. Select the access lter that you want to delete, then click Delete Filter. The Delete IP Filter dialog box opens.
5. Click OK to conrm deletion, then click OK to close the Edit Settings dialog box.
View and Delete Access Violations for a Storage Center
View access violations to determine who has unsuccessfully attempted to log in. A maximum of 100 access violations are recorded
and displayed for a Storage Center.
Prerequisite
The Storage Center must be added to Storage Manager using a Storage Center user with the Administrator privilege.
Steps
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. In the Summary tab, click Edit Settings. The Edit Storage Center Settings dialog box opens.
3. Click the IP Filtering tab.
4. Click Show Access Violations. The Show Access Violations dialog box appears.
5. (Optional) Delete access violations.
a. Select the corresponding check box for each violation that you want to delete.
b. Click Delete Selected Violations. A conrmation dialog box opens.
c. Click OK to close the conrmation dialog box, then click OK to close the Show Access Violations dialog box.
6. Click OK to close the Edit Storage Center Settings dialog box.
Apply Access Filtering Settings to Multiple Storage Centers
Access ltering settings that are assigned to a single Storage Center can be applied to other Storage Centers.
Prerequisite
The Storage Center must be added to Storage Manager using a Storage Center user with the Administrator privilege.
Steps
1. Click the Storage view.
2. In the Storage pane, select the Storage Center that has the settings you want to apply to other Storage Centers.
3. In the Summary tab, click Edit Settings. The Edit Settings dialog box appears.
4. Click the IP Filtering tab.
5. Select the Apply these settings to other Storage Centers check box.
6. Click Apply. The Select Storage Center dialog box appears.
7. Select the check box for each Storage Center to which you want to apply the settings.
8. When you are nished, click OK.
244
Storage Center Maintenance