Administrator Guide
3. Click the Disks node.
4. Right-click the name of a Secure Disk disk and select Rekey Disk.
A conrmation box opens.
5. Click OK.
Copy Volumes to Disk Folder
Copy volumes from one Secure Disk folder to another folder. The target folder can be either a secure folder or a nonsecure folder.
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. Click the Storage tab.
3. Click the Disks node.
4. Right-click the name of a Secure Disk folder and select Copy Volumes to Disk Folder.
The Copy Volumes to Disk Folder dialog box opens.
5. Choose the source volume by selecting the checkbox next to the name of the disk folder.
6. Use the drop-down menu to select the destination disk folder.
7. ClickOK.
Create Secure Data Disk Folder
A Secure Data folder can contain only SEDs that are FIPS certied. The Create Disk folder dialog box shows the Secure Data folder
option if Storage Manager recognizes unmanaged SEDs and has the Self-Encrypting Drives license.
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. Click the Storage tab.
3. Click the Disks node.
4. Click Create Disk Folder.
The Create Disk Folder dialog box opens. The dialog box displays all unmanaged disks and designates spare disks.
5. Select the Create as a Secure Data folder checkbox.
NOTE: All non-SEDs must be removed from the Unmanaged Disks table before creating a Secure Data folder.
6. Type a name in the Name eld.
7. To change which disks will be managed, click Change.
8. To modify the tier redundancy, select the Create Storage Type checkbox and then modify the redundancy for each tier as
needed.
• For single-redundant RAID levels, select Redundant.
• For dual-redundant RAID levels, select Dual Redundant.
9. Click OK.
288
Storage Center Maintenance