Administrator Guide

Set an Asset Tag for a Disk Enclosure
An enclosure asset tag can be used to identify a specic component for company records. Storage Manager allows you to set an
asset tag for
enclosures that support it.
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, select the enclosure.
4. In the right pane, click Edit Settings. The Edit Settings dialog box appears.
5. In the Asset Tag eld, type an asset tag for the enclosure.
6. Click OK.
Delete an Enclosure
Delete an enclosure if it will be physically removed from the Storage Center.
Prerequisites
• All data must be moved o the enclosure by releasing the disks and rebalancing RAID.
• The enclosure must be down.
Steps
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, select the enclosure.
4. In the right pane, click Delete Enclosure. The Delete Enclosure dialog box appears.
NOTE: If there are no disks currently in that enclosure, the dialog will not appear. The enclosure will be removed
without a request for conrmation.
5. Click OK.
Mute an Enclosure Alarm
Mute an enclosure alarm to prevent it from sounding.
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, select Audible Alarms under the enclosure.
4. In the right pane, right-click the audible alarm, then select Request Mute.
Unmute an Enclosure Alarm
Unmute an enclosure alarm to allow it to sound.
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, select Audible Alarms under the enclosure.
4. In the right pane, right-click the audible alarm, then select Request Mute O.
Clear the Swap Status for an Enclosure Cooling Fan
Clear the swap status for an enclosure cooling fan to acknowledge that it has been replaced.
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, select Cooling Fan Sensors.
Storage Center Maintenance
293