Administrator Guide
View a Diagram of a Controller
The Hardware tab displays a diagram of the back of a controller selected from the Hardware tab navigation pane.
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand the Controllers node then select a controller. The right pane displays a diagram of
the controller
The hardware view indicates failed components with a red overlay.
4. To view more information about hardware components, mouse over a hardware component. A tool tip appears and displays
information including the name and status of the hardware component.
5. To adjust the zoom on the controller diagram, change the position of the zoom slider located to the right of the controller
diagram.
• To zoom in, click and drag the zoom slider up.
• To zoom out, click and drag the zoom slider down.
6. To move the controller diagram in the Controller View tab, click and drag the controller diagram.
View IO Port Information and Status for a Controller
The controller node on the Hardware tab displays summary and status information for all Fibre Channel, iSCSI, and SAS ports on IO
cards installed in the controller.
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand the Controllers node, expand the node for a specic controller, then select IO
Ports. The right pane displays summary and status information for all IO port types present in the controller.
4. To view more detailed information for a particular protocol, select Fibre Channel, iSCSI, or SAS in the Hardware tab navigation
pane.
Locate a Port in the Controller Diagram
The Hardware tab displays the location of a port in the controller diagram when that port is selected from the Hardware tab
navigation pane.
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand the Controllers node, expand the node for a specic controller, then select IO
Ports.
4. Select an IO port from the Fibre Channel, iSCSI, or SAS nodes. The Port View tab in the right pane highlights the selected
port in the controller diagram.
View Fan Status for a Controller
The Fan Sensors node on the Hardware tab displays summary and status information for fans in the controller.
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand the Controllers node, expand the node for a specic controller, then click Fan
Sensor. The right pane displays summary and status information for the fans in the controller.
View Power Supply Status for a Controller
The Power Supply node on the Hardware tab displays summary and status information for power supplies in the controller.
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand the Controllers node, expand the node for a specic controller, then click Power
Supply. The right pane displays summary and status information for the power supplies in the controller.
Viewing Storage Center Information
325