Administrator Guide

NOTE: For user interface reference information, click Help.
View Current Endurance and Endurance History for an SSD
The current endurance level for an SSD is displayed as a percentage. The endurance level for an SSD is also recorded over time and
can be displayed in a graph.
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. Click the Storage tab.
3. In the Storage tab navigation pane, select the SSD.
4. View endurance information for the SSD.
• To view the current endurance level for the SSD, see the Endurance value displayed in the right pane.
• To view endurance history information for the SSD, click the Endurance History subtab.
View the Current Endurance Level for All SSDs in a Disk Folder
If a disk folder contains SSDs, the summary table displays the percentage of wear life remaining for each SSD and a corresponding
endurance chart.
1. Select a Storage Center from the Storage view. (Data Collector connected Storage Manager Client only)
2. Click the Storage tab.
3. In the Storage tab navigation pane, select the disk folder.
4. On the Disks subtab, locate the Endurance and Endurance Chart columns in the table.
Figure 44. SSD Endurance
The Endurance Chart column shows a wear gauge that indicates the amount of wear life remaining and when an alert will be
sent. The gauge indicators are:
• Red: Fail zone calculated from disk data that estimates when 120 days remain in the life of the disk. An alert is sent when
the wear life moves from the green zone to the red zone.
• Green: Safe operating zone.
• Black Tick Mark: Current Endurance level, in which the far right position indicates 100% endurance (new disk, no wear) and
the far left position indicates 0% (end of life). This is also shown as the Endurance percentage in the Endurance column.
Viewing Storage Center Information
329