Administrator Guide

Change the Prex for the Secured Management Subnet
Change the prex for the secured management subnet.
1. the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, select Cluster Connectivity, and then click the Management Network tab.
4. In the Management Network panel, click Edit Settings. The Modify Administrative Network dialog box opens.
5. In the Prex eld, type a prex for the secured management subnet.
6. Click OK.
Change the VLAN Tag for the Secured Management Subnet
When a VLAN spans multiple switches, the VLAN tag is used to specify which ports and interfaces to send broadcast packets to.
1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, select Cluster Connectivity, and then click the Management Network tab.
4. In the Management Network panel, click Edit Settings. The Modify Administrative Network dialog box opens.
5. In the VLAN Tag eld, type a VLAN tag for the secured management subnet.
6. Click OK.
Change the VIP for the Secured Management Subnet
Change the secured management subnet VIP through which an administrator manages the FluidFS cluster.
1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, select Cluster Connectivity, and then click the Management Network tab.
4. In the Management Network panel, click Edit Settings. The Modify Administrative Network dialog box opens.
5. To change a management VIP:
a. In the Virtual IP Address eld, type a management virtual IP address.
NOTE: A secured management subnet has a single management VIP.
6. Click OK.
Change the NAS Controller IP Addresses for the Secured Management Subnet
To change the NAS controller IP addresses for the secured management subnet when, for example, you go from an unsecured to a
secured environment or you physically relocate your equipment:
1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, select Cluster Connectivity, and then click the Management Network tab.
4. In the Management Network panel, click Edit Settings. The Modify Administrative Network dialog box opens.
5. The Controller IP Addresses are displayed.
6. You can add or remove controller IP addresses by clicking Add or Remove.
7. Click OK.
FluidFS System Management for FS Series Appliances
351