Administrator Guide
Change the VLAN Tag for an iSCSI Fabric
Change the VLAN tag for an iSCSI fabric. When a VLAN spans multiple switches, the VLAN tag species which ports and interfaces
to send broadcast packets to.
1. In the Storage view, select a FluidFS cluster.
2. Click the NAS Pool tab.
3. Click the Network tab.
4. In the iSCSI Fabrics panel, select an appliance and then click Edit Settings. The Modify Settings for Fabric SAN dialog box
opens.
5. In the VLAN Tag eld, type the new VLAN tag for the iSCSI fabric.
6. Click OK.
Change the NAS Controller IP Addresses for an iSCSI Fabric
Change the NAS controller IP addresses for an iSCSI fabric.
1. In the Storage view, select a FluidFS cluster.
2. Click the Network tab.
3. In the iSCSI Fabrics panel, select an appliance and then click Edit Settings. The Modify Settings for Fabric SAN dialog box
opens.
4. Select a controller from the list of controllers and then click Edit Settings. The Edit Controller IP Address dialog box opens.
5. In the IP Address eld, type in the address for the controller and then click OK to close the Edit dialog box.
6. Click OK.
FluidFS Networking
371