Administrator Guide

• The maximum number of active incoming replications is 100. If more than 100 replications are active, they are queued.
• The maximum number of replication partners is 100.
• The maximum number of replicated NAS volumes or containers (source and target) on a cluster is 1024.
• The maximum number of replication schedules per system is 1024.
Dene a QoS Node
Create a QoS (Quality of Service) denition to bind a QoS node (network level) of outgoing trac to a replication.
1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, click Replications.
4. Click the Replication QoS Nodes tab.
5. Click Create QoS Node.
The Create Replication QoS Node dialog box opens.
6. Type a name and choose the bandwidth limit for the node in KB/s.
7. Click OK.
The Edit Replication QoS Schedule dialog box opens.
8. Drag the mouse to select an area, right-click on it, and choose the percentage of the bandwidth limit to allow in these day and
hour combinations.
9. Click OK.
Change a QoS Node
Change a QoS (Quality of Service) node (network level) of outgoing trac bound to a replication.
1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, click Replications.
4. Click the Replication QoS Nodes tab.
5. Right-click on a QoS and select Edit Settings.
The Edit Replication QoS Settings dialog box opens.
6. Change the name and/or the bandwidth limit for the node in KB/s.
7. Click OK.
The Edit Replication QoS Schedule dialog box opens.
8. Drag the mouse to select an area, right-click on it, and choose the percentage of the bandwidth limit to allow in these day and
hour combinations.
9. Click OK.
Congure Replication Throttling
Use replication throttling to ne-tune network bandwidth usage for replication of a pair of NAS volumes between two clusters.
1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, click Replications.
4. Click the Replication NAS Volumes tab, select a replication, and then right-click.
5. Select Replication Actions.
6. From the drop-down list, select Edit Replication QoS.
7. Select the Enable QoS checkbox and then select a predened QoS node from the drop-down list.
8. Click OK.
FluidFS Data Protection
451