Administrator Guide

Figure 64. Appliance View Tab Tool Tip
7. To adjust the zoom on the NAS appliance diagram, change the position of the zoom slider located to the right of the NAS
appliance diagram.
• To zoom in, click and drag the zoom slider up.
• To zoom out, click and drag the zoom slider down.
8. To move the NAS appliance diagram in the Controller View tab, click and drag the NAS appliance diagram.
View a Diagram of the Front View of a NAS Appliance
Storage Manager displays an interactive diagram of the front view of a NAS appliance.
1. Click the Storage view and select a FluidFS cluster.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand Appliances, then select Appliance ID .
4. In the right pane, click the Appliance Front View tab. A diagram of the front view of the NAS appliance is displayed in the right
pane. Hardware components that report an error condition are indicated with a red overlay.
5. To view more information about hardware components in the NAS appliance diagram, mouse over a hardware component in the
NAS appliance diagram. A tool tip appears and displays information including the name and status of the hardware component.
The following graphic shows an example of a tool tip that appears after hovering the mouse cursor over a fan.
Figure 65. Appliance Front View Tab
6. To adjust the zoom on the NAS appliance diagram, change the position of the zoom slider located to the right of the NAS
appliance diagram.
• To zoom in, click and drag the zoom slider up.
• To zoom out, click and drag the zoom slider down.
7. To move the NAS appliance diagram in the Appliance Front View tab, click and drag the NAS appliance diagram.
View a Diagram of the Rear View of a NAS Controller
Storage Manager displays an interactive diagram of the rear view of a NAS controller.
1. Click the Storage view and select a FluidFS cluster.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand Appliances→ Appliance ID , then select Controller ID .
4. In the right pane, click the Controller View tab. A diagram of the rear view of the NAS appliance is displayed in the right pane.
The selected NAS controller is indicated with a green overlay.
Hardware components that report an error condition are indicated with a red overlay. For example, the following graphic shows
a failed power supply in the NAS appliance.
622
FluidFS Monitoring