Administrator Guide

Figure 66. Controller View Tab
5. To view more information about hardware components in the NAS controller diagram, mouse over a hardware component in the
NAS controller diagram. A tool tip appears and displays information including the name and status of the hardware component.
The following graphic shows an example of a tool tip that appears after hovering the mouse cursor over a network port.
Figure 67. Controller View Tab Tool Tip
6. To adjust the zoom on the NAS appliance diagram, change the position of the zoom slider located to the right of the NAS
appliance diagram.
• To zoom in, click and drag the zoom slider up.
• To zoom out, click and drag the zoom slider down.
7. To move the NAS appliance diagram in the Controller View tab, click and drag the NAS appliance diagram.
View the Status of the Interfaces
View the status of the interfaces in a NAS controller.
1. Click the Storage view and select a FluidFS cluster.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand Appliances→ Appliance ID → Controller ID , then select Interfaces. The status of
each interface is displayed in the right pane.
View the Status of the Disks
View the status of the disks in the internal storage device in a NAS controller.
1. Click the Storage view and select a FluidFS cluster.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand Appliances→ Appliance ID → Controller ID , then select Disks. The status of each
disk is displayed in the right pane.
View the Status of a Backup Power Supply
View the status of a backup power supply in a NAS controller.
1. Click the Storage view and select a FluidFS cluster.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand Appliances→ Appliance ID → Controller ID , then select Backup Power Supply.
The status of the backup power supply is displayed in the right pane.
FluidFS Monitoring
623