Administrator Guide

Related link
Managed Replications for Live Volumes
View the Snapshots for a Replication
When a replication is selected, the Snapshots subtab displays the snapshots for the source volume and the destination volume.
1. Click the Replications & Live Volumes view.
2. On the Replications tab, select the replication.
3. In the bottom pane, click the Snapshots tab.
View the Progress Report for a Replication
When a replication is selected, the Progress Reports subtab displays charts for the amount of data waiting to be copied and the
percent complete.
1. Click the Replications & Live Volumes view.
2. On the Replications tab, select the replication.
3. In the bottom pane, click the Progress Reports tab.
View IO/sec and MB/sec Charts for a Replication
When a replication is selected, the IO Reports subtab displays charts for IO per second and MB per second.
1. Click the Replications & Live Volumes view.
2. On the Replications tab, select the replication.
3. In the bottom pane, click the IO Reports tab.
Managing Cross-Platform Replication
The following section describes managing replications between PS Series groups and Storage Centers.
Cross-Platform Replication Requirements
Storage Centers and PS Groups must meet the following minimum requirements to allow replication between Storage Center and PS
Group.
Table 17. Cross-Platform Replication Requirements
Component Requirement
Storage Center rmware 7.0
PS Group rmware 9.0
NOTE: SCv2000 series storage controllers do not support replication between Storage Center and PS Group storage
systems.
Managing Replications Between PS Series Groups and Storage Centers
This section includes information for managing replications between PS Series groups and Storage Centers.
Create a Replication From a PS Group to a Storage Center
Create a replication from a PS Group to a Storage Center to setup a replication relationship. After setting up the replication, replicate
a volume from a PS Group to a Storage Center using a replication schedule or Replicate Now.
Prerequisite
The Storage Center and PS Group must meet the minimum requirements for cross-platform replication.
Steps
1. Click the Storage view.
2. In the Storage pane, select a PS Group.
Storage Center Replications and Live Volumes
679