Administrator Guide

3. Click the Storage tab.
4. From the Storage tab navigation pane, select a volume.
5. Click Replicate Volume.
6. Select a remote storage system from the table.
7. Click Next.
If a remote iSCSI connection is not congured, the Congure iSCSI Connection wizard opens. For instructions on setting up a
remote iSCSI connection, see Congure an iSCSI Connection for Remote Storage Systems
8. Congure the replication settings as needed.
NOTE: For information on the replication settings, click Help.
9. Click Finish.
Related link
Cross-Platform Replication Requirements
Replicate to a Storage Center on Demand
Use Replicate Now to copy volume data to the destination Storage Center. Replicating from a PS Group to a Storage Center copies
a snapshot to the destination PS Group as a restore point. Before the data on the destination PS Group can be used, the restore
point must be activated.
Prerequisite
A replication must be created between the PS Group and the Storage Center.
Steps
1. Click the Replications and Live Volumes tab.
2. Select the replication from the replications table.
3. Click Replicate Now.
The Replicate Now dialog box opens.
4. Click OK
Edit a Cross-Platform Replication
Edit a cross-platform replication to change the settings of the replication. Setting vary based on which platform hosts the source
volume.
1. Click the Replications & Live Volumes view.
2. In the Replications tab, select a replication.
3. Click Edit Settings.
The Edit Replication Settings dialog box appears.
4. Modify the settings.
NOTE: For more information on the options on the dialog box, click Help.
5. Click OK.
Create a Replication from a Storage Center to a PS Group
Replicating volumes from a Storage Center to a PS Group is similar to replicating volumes from a Storage Center to another Storage
Center.
Prerequisite
You must congure an iSCSI connection between the PS Group and the Storage Center.
Steps
1. Click the Storage view.
2. In the Storage pane, select the Storage Center that hosts the volume you want to replicate.
3. Click the Storage tab.
4. In the Storage tab navigation tree, select the volume you want to replicate.
5. In the right pane, click Replicate Volume.
680
Storage Center Replications and Live Volumes