Administrator Guide

Conguring Network Settings
Use the Network tab to manage Data Collector ports, congure a proxy server for Dell SupportAssist, or manually select a network
adapter.
Figure 128. Data Collector Manager — Network Tab
Modify the Ports Used by the Data Collector
The ports for the web server and legacy web service can be modied to avoid port conicts.
1. In the Data Collector Manager, click the Network tab.
2. To change the port used to by Storage Manager to receive data from Storage Centers and Server Agents, modify the value in
the
Legacy Web Service Port eld.
3. To change the port used by the Storage Manager website and the Dell Storage Manager Client, modify the value in the Web
Server Port eld.
4. Click Apply Changes.
Congure a Proxy Server for Dell SupportAssist
To send diagnostic data using Dell SupportAssist through a proxy server, enable the proxy server on the Data Collector. All network
trac to the
Dell SupportAssist servers uses HTTPS.
1. In the Data Collector Manager, click the Network tab.
2. Select the Proxy Server check box.
3. Enter the host name or IP address of the proxy server in the Proxy Server Host or IP Address eld.
4. Enter the port on which the proxy server accepts connections in the Proxy Server Port eld.
5. If the proxy server requires authentication:
a. Enter the authentication username in the Proxy Server User Name eld.
b. Enter the authentication password in the Proxy Serve User Password eld.
6. Click Apply Changes.
Manually Select the Data Collector Network Adapter
The Data Collector attempts to automatically select the network adapter to use by default. If the host server has multiple network
adapters, automatic detection can fail and the network adapter must be selected manually.
Prerequisite
The network adapter must have connectivity to the devices managed by Storage Manager, including Storage Centers , FluidFS
clusters, and Server Agents.
Data Collector Management
805