Administrator Guide

Steps
1. In the Data Collector Manager, click the Network tab.
2. Clear the Automatically Select Network Adapter check box.
3. Select the network adapter to use from the Network Adapter drop-down menu.
4. Click Apply Changes.
Conguring Security Settings
Use the Security tab to congure a custom SSL certicate for the Data Collector or set a login banner message for the client.
Figure 129. Data Collector Manager — Security Tab
Congure a Custom SSL Certicate
Congure a custom SSL certicate to avoid certicate errors when connecting to the Data Collector website. An SSL certicate is
also required to communicate with a directory service using LDAP with the StartTLS extension or the LDAPS protocol.
Prerequisites
• The custom certicate must be signed by a Certicate Authority (CA) that is trusted by the hosts in your network.
• The certicate public key le must use DER or PEM encoding.
• The certicate private key le must be in PKCS#12 format.
• You must know the alias and password for the private key.
Steps
1. In the Data Collector Manager, click the Security tab.
2. Click Change Certicate. The Register Certicate dialog box opens.
Figure 130. Register Certicate Dialog Box
3. Upload the public key le.
a. Next to the Public Key eld, click Select. The Select dialog box opens.
806
Data Collector Management