Administrator Guide

b. Browse to the location of the public key le, and then select it.

c. Click Open. The Select dialog box closes and the Public Key eld is populated with the path to the public key le.

4. Upload the private key le.

a. Next to the Private Key eld, click Select. The Select dialog box opens.

b. Browse to the location of the private key le, and then select it.

c. Click Open. The Select dialog box closes and the Private Key eld is populated with the path to the private key le.

5. In the Alias eld, type the name of the entry in the PKCS #12 private key le to use as the private key.

6. In the Password eld, type the password for the private key le.

7. Click OK. The Register Certicate dialog box closes.

8. Click Apply Changes to activate the certicate and restart the Data Collector service. A conrmation dialog box opens.

9. Click Yes to conrm that you want to restart the Data Collector service.

Congure a Login Banner Message

Set a login banner to display a message to users before they log in to the Client or Data Collector Manager.

1. In the Data Collector Manager, click the Security tab.

2. In the Message eld, type a message to display on the login screens for the Client and Data Collector Manager.

3. Click Apply Changes to activate the login banner message and restart the Data Collector service. A conrmation dialog box

appears.

4. Click Yes to conrm that you want to restart the Data Collector service.

Conguring Directory Service Settings

Use the Directory Service tab to congure the Data Collector to use an Active Directory or OpenLDAP directory service to

authenticate Storage Manager users.

Figure 131. Data Collector Manager — Directory Service Tab