Administrator Guide

c. Browse to the location where you want to save the export le.
d. In the File name eld, type the le name.
e. Click Save. The dialog box closes.
5. Click OK.
• If you chose to use Dell SupportAssist to send debug logs to Dell Technical Support, a progress message is displayed and the
debug logs are sent.
• If you chose to save information to an export le, conguration and log data is exported to the specied le.
Managing the Storage Manager Virtual Appliance
The Storage Manager Virtual Appliance CLI includes conguration options that allow you to congure network settings, view
diagnostic data, and update the Storage Manager Virtual Appliance.
Congure Virtual Appliance Settings
Using the Conguration menu in the Storage Manager Virtual Appliance CLI you can change network and partition settings for the
Storage Manager Virtual Appliance.
Congure an NTP Server
A network time protocol (NTP) server provides the time and date to the Storage Manager Virtual Appliance.
Prerequisite
The NTP server must be accessible from the Storage Manager Virtual Appliance.
Steps
1. Using the VMware vSphere Client, launch the console for the Storage Manager Virtual Appliance.
2. Log in to the Storage Manager Virtual Appliance.
3. Press 2 then Enter to enter the Conguration menu.
4. Press 1 then Enter to enter the NTP menu.
5. Press 1 then Enter to launch the NTP setup.
6. Type the IP address or host name of an NTP server.
7. Press Enter.
Congure IPv4 Settings
Use the Storage Manager Virtual Appliance CLI to modify the IPv4 network settings.
1. Using the VMware vSphere Client, launch the console for the Storage Manager Virtual Appliance.
2. Log in to the Storage Manager Virtual Appliance.
3. Press 2 then Enter to enter the Conguration menu.
4. Press 2 then Enter to start the Network IPv4 setup.
5. Press 1 or 2 to enable or disable DHCP. Press Enter.
6. To modify the IP address, type an IP address. Press Enter.
7. To modify the netmask, type a new netmask. Press Enter.
8. To modify the gateway address, type a new gateway address. Press Enter.
9. To assign a new hostname, type a hostname. Press Enter.
10. To modify the domain name used by the Storage Manager Virtual Appliance, type a new domain name. Press Enter.
11. To add a new DNS server, type the IP address of one or more DNS servers. If there are multiple IP addresses, separate them
with a comma. Press Enter.
12. Press 1 to conrm the changes. Press Enter.
13. Press Enter to complete the conguration.
816
Data Collector Management