Administrator Guide

4. Select Perform RAID Rebalance immediately.
5. Click OK.
Cancel a RAID Rebalance
Cancel a RAID rebalance to stop an on-going RAID rebalance. Cancelling a RAID rebalance does not cancel the need to rebalance. You will
still be prompted to rebalance RAID.
About this task
NOTE: The RAID rebalance stops after completing the current rebalance pass.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of Unisphere
Central.
2.
From the STORAGE menu, click Disks.
The Disks view is displayed.
3. Click Rebalance RAID.
The RAID Rebalance dialog box opens.
4. Click Stop Rebalancing. After rebalance stops, a confirmation dialog box opens.
5. Click OK.
Schedule a RAID Rebalance
Schedule a RAID rebalance to rebuild the data on all of the disks at a later date.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of Unisphere
Central.
2.
From the STORAGE menu, click Disks.
The Disks view is displayed.
3. Click Rebalance RAID.
The RAID Rebalance dialog box opens. If a RAID rebalance is needed, the dialog box shows RAID rebalance options. If a RAID
rebalance is needed, the dialog box shows RAID rebalance options.
4. Select Schedule RAID rebalance.
5. Select a date and time.
6. Click OK.
Check the Status of a RAID Rebalance
The RAID Rebalance displays the status of an in-progress RAID rebalance and indicates whether a rebalance is needed.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of Unisphere
Central.
2.
From the
STORAGE menu, click Disks.
The Disks view is displayed.
3. Click Rebalance RAID.
The RAID Rebalance dialog box shows the status of a RAID rebalance.
4. Click OK.
152
Storage Center Maintenance