Manualshelf

Administrator Guide

ManualsBrandsDell ManualsCompellent (SCStorage SCv2000
201202203204205206207208209210
Table Of Contents
2. In the Storage pane, select a PS Series group.
3. Click the Storage tab.
4. In the Storage tab navigation pane, expand the Access node and select the access policy group to delete.
5. In the right pane, click Delete. The Delete Access Policy Group dialog box opens.
6. Click OK.
Create an Access Policy
Access policies associate one or more authentication methods to available volumes.
Steps
1. Click the Storage view.
2. In the Storage pane, select a PS Series group.
3. Click the Storage tab.
4. In the Storage tab navigation pane, select the Access node.
5. In the right pane, click Create Access Policy. The Create Access Policy dialog box opens.
6. In the Name field, type a name for the access policy.
7. (Optional) In the Description field, type a description for the access policy.
8. In the Access Points area, click Create to create an access point.
● To edit an access point, select the access point and click Edit. The Edit Access Point dialog box opens.
● To remove an access point from the access policy, select the access point and click Remove
9. Click OK.
Edit an Access Policy
After an access policy is created, you can edit the settings of the access policy.
Steps
1. Click the Storage view.
2. In the Storage pane, select a PS Series group.
3. Click the Storage tab.
4. In the Storage tab navigation pane, expand the Access node and select an access policy.
5. In the right pane, click Edit Settings. The Edit Access Policy dialog box opens.
6. In the Name field, type a name for the access policy group.
7. (Optional) In the Description field, type a description for the access policy group.
8. In the Access Policies area, click Create to create an access point.
●
To edit an access point, select the access point and click Edit. The Edit Access Point dialog box opens.
● To remove an access point from the access policy, select the access point and click Remove.
9. Click OK.
Create an Extended Access Point
Extended access points define the resources that represent the access policy.
Steps
1. Click the Storage view.
2. In the Storage pane, select a PS Series group.
3. Click the Storage tab.
4. In the Storage tab navigation pane, expand the Access node and select an access policy.
5. In the right pane, click Edit Settings. The Edit Access Policy dialog box opens.
PS Series Storage Array Administration
209