Administrator Guide

3. Click (Column Filters).
The Filters dialog box opens.
4. Select one or more of the following filter categories:
● Severity
● Status
● Date & Time
● Message
● Storage Center (Unisphere Central view only)
● Source Name
● Category
●
Type
● Acknowledged
● Cleared
5. Select one or more filter values for the selected categories.
6. Click Apply.
7. Click X to close the Filters dialog box.
Select the Columns to Display
Show or hide columns to customize the view.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of
Unisphere Central.
2. From the
MONITORING menu, click Alerts.
The Alerts view is displayed.
3. Click (Show/Hide Columns).
The Columns dialog box opens.
4. Select the checkboxes of the columns to show and clear the checkboxes of the columns to hide.
5. Click X to close the Columns dialog box.
Send Storage Center Alerts and Indications to the Data Collector
Immediately
By default, the Data Collector retrieves alerts and indications from a Storage Center at a regular interval. If you want alerts and
indications to be displayed in Unisphere Central immediately when they are triggered, configure a Storage Center to send them
to the Data Collector.
Steps
1. If you are connected to a Data Collector, select a Storage Center from the drop-down list in the left navigation pane of
Unisphere Central.
2. From the Summary tab, click
(Settings).
The Storage Center Settings dialog box opens.
3. Click the Alerts and Logs tab.
4. Select the Send Alerts to Data Collector checkbox.
5. Click OK.
Data Collector Alerts
Data Collector alerts are a collection of messages that have been generated by events in Unisphere Central.
You can view alerts on the Data Collector tab or configure Unisphere Central to email you when events occur.
272
Storage Center Monitoring