Administrator Guide

● DSM Server - Generates Data Collector certificates.
● VASA Server - Generates VASA Provider certificates.
c. Select the new IP address or FQDN of the Data Collector from the Certificate Subject drop-down menu.
d. If you are generating a VASA Provider certificate, type the username and password of a Data Collector user with
Administrator privileges in the DSM User Name and Password fields.
e. Click OK.
6. To upload registered SSL certificates, click Edit.
The Register Certificate dialog box opens.
7. To upload a public key file.
a. Click Choose File located to the right of the Public Key text.
b. Browse to the location of the public key file, and then select it.
c. Click Open.
The Public Key field is populated with the path to the public key file.
8. To upload the private key file.
a. Click Browse located to the right of the Private Key text.
b. Browse to the location of the private key file, and then select it.
c. Click Open.
The Private Key field is populated with the path to the public key file.
9. Type the name of the entry in the PKCS #12 private key file to use as the private key in the In the Alias field.
10. Type the password for the private key file in the Password field.
11. Click OK.
The Data Collector Restart dialog box opens.
12. Click Yes.
The Data Collector service stops and restarts.
Configure a Login Banner Message
Set a login banner to display a message to users when they connect to a Data Collector.
Steps
1.
If a Storage Center is selected from the drop-down list in Unisphere Central, click
(Home).
The Unisphere Central Home page is displayed.
2. Click Data Collector.
The Data Collector view is displayed.
3. Click the General tab, and then click the Security subtab.
4. In the Login Message section, click Edit.
The Login Message dialog box opens.
5. Type a message to display on the login screen in the Login Banner Message field.
6. Click OK.
Configure Data Collector Ports
Use the Ports tab to modify Data Collector ports to avoid port conflicts.
About this task
NOTE: The Data Collector must be restarted to apply port changes.
Steps
1.
If a Storage Center is selected from the drop-down list in Unisphere Central, click (Home).
The Unisphere Central Home page is displayed.
2. Click Data Collector.
304
Data Collector Management