Release Notes

2018 Q1 Drive Firmware Updates
NOTE: SCOS version 6.6.x and later supports plug-and-play discovery for most new drive introductions. Drive rmware package
updates are not needed to accept new drives. Plug-and-play discovery support for 4K sector drives (8 TB and 10 TB) requires
SCOS version 7.1.1 or later.
Aected Software Versions
This rmware update package contains drive rmware updates for Storage Centers running the following versions of SCOS:
• Version 7.2.31, 7.2.11
• Version 7.1.30, 7.1.20, 7.1.12
• Version 6.7.40
Drive Firmware Updates in SCOS Version 7.2
The following table lists the drive rmware updates for these software releases. These updates represent Dell’s latest qualication versions,
and are general rmware updates (including ongoing improvements) unless otherwise noted in the comments.
Product ID (SAS Drives)
Existing Firmware
Version
New Firmware
Version
Priority Comments
PX05SRB048Y
AU05 AU09 Recommended Ongoing rmware improvements
PX05SRB096Y
PX05SRB192Y
PX05SRB384Y
PX05SMB040Y
PX05SMB080Y
PX05SMB160Y
HUH721008AL4204 LF04 LF12 Recommended Ongoing rmware improvements
HUH721010AL4200 LR04 LR12 Recommended Ongoing rmware improvements
ST300MP0005
VE0B VE0C Recommended Ongoing rmware improvementsST600MP0005
ST450MP0005
ST300MP0025
VEC9 VECB Recommended Ongoing rmware improvements
ST600MP0025
ST1800MM0018 TE2A TE2B Recommended Ongoing rmware improvements
ST600MM0088
TE0B TE0C Recommended Ongoing rmware improvements
ST900MM0168
ST1200MM0088
2 Storage Center Drive Firmware Updates
2018