Reference Guide

• Requested server or WWN is not found on the Storage Center.
• Requested WWN is not assigned to the requested server.
Format
server removehba {–name string | –index integer} –WWN string,…,string {options}
Options
–h
Shows help for command options.
–index integer
Species the server index.
–name string
Species the server name. Names that contain spaces must be enclosed in single quotes.
–WWN string
Species which HBA to remove from the server. Multiple WWNs are delimited by commas (,) and names that contain spaces must be
enclosed in single quotes.
Example
Remove an HBA from a server:
server removehba -name 'server 1' -WWN 210200E08B309080
server show
Description
Shows the attributes of known attached servers on a Storage Center. Output depends on the lter options specied in the command.
Format
server show {options}
Options
–connectstatus string
Species a server connection status. (Storage Center 5.0 and later). Status may be:
• Connected: indicates that all primary paths are up between the HBA and the Storage Center.
• Disconnected: indicates that no primary paths are up between the HBA and the Storage Center.
56
Command Reference