Reference Guide

volume expand
Description
Expands the size of a volume.
Format
volume expand {–deviceid string | –index integer | –name string –serialnumber string} –size
integer [k|m|g|t]
Options
–deviceid string
Species the volume device ID. See About Device IDs for information.
–h
Shows help for command options.
–index integer
Species the volume index.
–name string
Species the volume name. Names that contain spaces must be enclosed in single quotes.
–serialnumber string
Species the volume serial number. (Available only when running on operating systems that expose serial numbers to the user.)
–size integer [k|m|g|t]
Species the amount by which to expand the volume. Enter the number of 512-byte blocks or the total byte size. To specify a total byte
size, use k for kilobytes, m for megabytes, g for gigabytes, or t for terabytes. For example, enter 32m to specify a block size of 32 MB.
Example
Expand a volume:
volume expand -name 'volume 1' -size 3g
volume expand -deviceid 6000d3100000c90000000000000000ca -size 3g
volume expand -index 44 -size 3g
volume map
Description
Maps an existing volume to a server.
84
Command Reference