Administrator Guide

6. Click OK.
Delete an Enclosure
Delete an enclosure if it will be physically removed from the Storage Center.
Prerequisites
• All data must be moved off the enclosure by releasing the disks and rebalancing RAID.
• The enclosure must be down.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand Enclosure.
The Enclosure view is displayed.
4. Select the enclosure you want to delete and click Delete Enclosure. The Delete Enclosure dialog box opens.
NOTE: If there are no disks currently in that enclosure, the dialog will not be displayed. The enclosure will be
removed without a request for confirmation.
5. Click OK.
Mute an Enclosure Alarm
Mute an enclosure alarm to prevent it from sounding.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand Enclosure and select an enclosure.
The Enclosure view is displayed.
4. Under Enclosure, select Audible Alarms.
5. In the right pane, right-click the audible alarm, then select Request Mute.
Unmute an Enclosure Alarm
Unmute an enclosure alarm to allow it to sound.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand Enclosures and select an enclosure.
The Enclosure view is displayed.
4. Under the selected enclosure, click Audible Alarms.
5. In the right pane, right-click the audible alarm, then select Request Mute Off.
Clear the Swap Status for an Enclosure Cooling Fan
Clear the swap status for an enclosure cooling fan to acknowledge that it has been replaced.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand Enclosures, then select and expand an enclosure.
Storage Center Maintenance
275