Administrator Guide

View Summary Information for All Enclosures in a Storage Center
The Enclosures node on the Hardware tab displays summary information for all disk enclosures in a Storage Center.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, select Enclosures.
4. Use the tabs in the right pane to view summary information for the enclosures and enclosure components.
View Summary Information for an Enclosure
The enclosure node on the Hardware tab displays summary information for the enclosure.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, select an enclosure. The right pane displays summary information.
View a Diagram of an Enclosure
The Hardware tab displays a graphical representation of an enclosure selected from the Hardware tab navigation pane.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand the Enclosures node.
4. Select an enclosure. The Enclosure View tab in the right pane displays a front and back diagram of the selected enclosure.
The hardware view indicates failed components with a red overlay.
5. To view more information about hardware components, mouse over a hardware component. A tool tip appears and displays
information including the name and status of the hardware component.
6. To adjust the zoom on the enclosure diagram, change the position of the zoom slider located to the right of the enclosure diagram.
• To zoom in, click and drag the zoom slider up.
• To zoom out, click and drag the zoom slider down.
7. To move the enclosure diagram in the Enclosure View tab, click and drag the enclosure diagram.
View Alarm Status for an Enclosure
The Audible Alarms node on the Hardware tab displays alarm status for the enclosure.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, select Audible Alarms. The right pane displays summary information.
View Disk Status for an Enclosure
The Disks node in the Hardware tab displays the statuses of all disks in the enclosure.
Steps
1. If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2. Click the Hardware tab.
3. In the Hardware tab navigation pane, expand the Enclosure node then the node for a specific enclosure.
4. Click the Disks node. The right pane displays the status of all disks in the enclosure.
312
Viewing Storage Center Information