Administrator Guide

3. In the NAS Pool Advanced Status area, click Edit Space Reclaming Settings.
4. To enable SCSI Unmap, select the Enable SCSI Unmap (TRIM) checkbox.
5. Click OK.
Enable or Disable a NAS Volume Used Space Alert
You can enable an alert that is triggered when a specified percentage of the NAS volume space has been used.
Steps
1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, expand NAS Volumes and then select a NAS volume.
4. In the NAS Volumes panel, click Edit Settings.
The Edit NAS Volume Settings dialog box opens.
5. Click Space.
6. Enable or disable a NAS volume used space alert:
• To enable a NAS volume used space alert, select the Used Space Alert checkbox.
• To disable a NAS volume used space alert, clear the Used Space Alert checkbox.
7. If a NAS volume used space alert is enabled, in the Used Space Threshold field, type a number (from 0 to 100) to specify the
percentage of used NAS volume space that triggers an alert.
8. Click OK.
Enable or Disable a NAS Volume Unused Space Alert
You can enable an alert that is triggered when the remaining unused NAS volume space is below a specified size. This alert is for
notification purposes only. The user is responsible for maintaining the space.
Steps
1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, expand NAS Volumes and then select a NAS volume.
4. In the NAS Volumes panel, click Edit Settings.
The Edit NAS Volume Settings dialog box opens.
5. Click Space.
6. Enable or disable a NAS volume unused space alert:
• To enable a NAS volume unused space alert, select the Unused Space Enabled checkbox.
• To disable a NAS volume unused space alert, clear the Unused Space Enabled checkbox.
7. If a NAS volume unused space alert is enabled, in the Unused Space Alert field, type a size in megabytes (MB), gigabytes (GB), or
terabytes (TB) to specify the unused NAS volume space that triggers an alert.
8. Click OK.
Enable or Disable a NAS Volume Snapshot Space Consumption Threshold Alert
You can enable an alert that is triggered when a specified percentage of the NAS volume space has been used for snapshots.
Steps
1. In the Storage view, select a FluidFS cluster.
2. Click the File System tab.
3. In the File System view, expand NAS Volumes and then select a NAS volume.
4. In the NAS Volumes panel, click Edit Settings.
The Edit NAS Volume Settings dialog box opens.
5. Click Space.
6. Enable or disable a NAS volume snapshot space consumption threshold alert:
• To enable a NAS volume snapshot space consumption threshold alert, select the Snapshot Space Aler checkbox.
• To disable a NAS volume snapshot space consumption threshold alert, clear the Snapshot Space Aler checkbox.
384
FluidFS Administration