Administrator Guide

View IO/sec and MB/sec Charts for a Replication
When a replication is selected, the IO Reports subtab displays the Replication IO/Sec and Replication MB/Sec charts.
About this task
The charts contain performance data for the replication of a volume from the primary Storage Center to the secondary Storage Center.
Steps
1. Click the Replications & Live Volumes view.
2. On the Replications tab, select a replication.
3. In the bottom pane, click the IO Reports tab.
Managing Cross-Platform Replication
The following section describes managing replications between PS Series groups and Storage Centers.
NOTE: A Storage Center to PS Group replication displays a % Complete value that is based on a calculation for Storage
Center to Storage Center replications.
NOTE: A PS Group to Storage Center replication displays a % Complete value that is based on a calculation for PS
Group to PS Group replications.
Cross-Platform Replication Requirements
Storage Centers and PS Groups must meet the following minimum requirements to allow replication between Storage Center and PS
Group.
Table 20. Cross-Platform Replication Requirements
Component Requirement
Storage Center firmware 7.0
PS Group firmware 9.0
NOTE: SCv2000 series storage controllers do not support replication between Storage Center and PS Group storage
systems.
PS Group Management Limitation
A Storage Manager administrator cannot add the same PS Group that has already been added to the Storage Manager Data Collector by
another Storage Manager administrator.
To map the previously added PS Group to an Storage Manager account, the Storage Manager administrator must use the PS Groups
subtab under the Users & System tab in the Data Collector view of Unisphere Central.
Managing Replications Between PS Series Groups and
Storage Centers
This section includes information for managing replications between PS Series groups and Storage Centers.
Create a Replication From a PS Group to a Storage Center
Create a replication from a PS Group to a Storage Center to setup a replication relationship. After setting up the replication, replicate a
volume from a PS Group to a Storage Center using a replication schedule or Replicate Now.
Prerequisites
The Storage Center and PS Group must meet the minimum requirements for cross-platform replication.
Storage Center Replications and Live Volumes
487