Administrator Guide

Steps
1. Click the Replications & Live Volumes view.
2. On the Live Volumes tab, select the Live Volume, then click Edit Settings. The Edit Live Volume dialog box appears.
3. In the Sync Mode area, select High Availability or High Consistency.
4. Click OK.
Related concepts
Synchronous Replication
Synchronous Replication Modes
Add a Managed Replication to a Live Volume
Add a managed replication to a Live Volume to replicate the primary volume to a third Storage Center.
Prerequisites
The primary, secondary, and managed replication destination Storage Centers must meet the managed replication requirements.
Steps
1. Click the Replications & Live Volumes view.
2. On the Live Volumes tab, select the Live Volume, then click Add Managed Replication. The Managed Replication Settings
wizard appears.
3. Select a destination Storage Center for the managed replication, then click Next.
• The wizard advances to the next page.
• If Fibre Channel or iSCSI connectivity is not configured between the local and remote Storage Centers, a dialog box appears. Click
Yes to configure iSCSI connectivity between the Storage Centers.
4. (Optional) Modify managed replication default settings.
• In the Replication Attributes area, configure options that determine how replication behaves.
• The Transport Type and QoS Node options are configured independently for the primary Storage Center and the secondary
Storage Center.
• In the Destination Volume Attributes area, configure storage options for the destination volume.
5. Click Finish.
The managed replication is created and begins replicating to the destination Storage Center.
Related concepts
Managed Replications for Live Volumes
Supported Live Volume with Managed Replication Topologies
Live Volume with Managed Replication Example Configuration
Managed Replication Requirements
Include Active Snapshot Data for an Asynchronous Live Volume
The Active Snapshot represents the current, unfrozen volume data.
Steps
1. Click the Replications & Live Volumes view.
2. On the Live Volumes tab, select the Live Volume, then click Edit Settings. The Edit Live Volume dialog box appears.
3. Select or clear the Replicate Active Snapshot check box then, click OK.
502
Storage Center Replications and Live Volumes