Administrator Guide
Table Of Contents
- 关于本指南
- Unisphere 和 Unisphere Central 2020 R1 管理员指南
- Unisphere 概览
- 使用入门
- Storage Center 概览
- Storage Center 部署
- Storage Center 管理
- Storage Center 服务器管理
- Storage Center 维护
- 管理 Storage Center 设置
- 配置 Storage Center 以继承设置
- 管理 Storage Center 用户和组
- 用户权限级别
- 用户组
- 用户帐户管理和验证
- 管理本地 Storage Center 用户
- 创建本地 Storage Center 用户
- 配置新 Storage Center 用户的默认用户首选项
- 增加本地 Storage Center 用户的权限级别
- 更改本地 Storage Center 用户的会话超时
- 更改 Storage Center 用户的首选语言
- 启用或禁用本地 Storage Center 用户的访问
- 修改本地 Storage Center 用户的本地组成员资格
- 配置本地 Storage Center 用户的首选项
- 修改关于本地 Storage Center 用户的描述性信息
- 更改本地 Storage Center 用户密码
- 删除本地 Storage Center 用户
- 还原删除的本地 Storage Center 用户
- 管理本地 Storage Center 用户组
- 管理本地 Storage Center 用户密码要求
- 启用目录服务验证
- 管理目录服务用户
- 管理目录用户组
- 管理前端 I/O 端口
- 管理后端 I/O 端口硬件
- 使用容错域对 Fibre Channel I/O 端口分组
- 使用容错域对 iSCSI I/O 端口分组
- 使用容错域对 SAS I/O 端口分组
- 管理磁盘和磁盘文件夹
- 管理安全数据
- 管理数据冗余
- 管理磁盘机柜
- 管理 Storage Center 控制器
- 更新 Storage Center
- 关闭和重新启动 Storage Center
- 管理现场可更换单元 (FRU)
- 远程 Storage Center 和复制 带宽控制
- Storage Center 复制和 Live Volume
- Storage Center 复制
- Storage Center Live Volume
- Live Volume 要求
- Live Volume 类型
- Live Volume 角色
- Live Volume 自动故障转移
- Live Volume 的受管复制
- 创建 Live Volume
- 修改 Live Volume
- 交换 Live Volume 的主要 Storage Center
- 取消 Storage Center 角色交换
- 更改 Live Volume 的传输类型
- 更改同步 Live Volume 的同步模式
- 向 Live Volume 添加受管复制
- 包含活动快照数据
- 为 Live Volume 启用或禁用重复数据消除
- 更改 Live Volume 的带宽控制
- 配置 Live Volume 以将数据写入到目标的最低层
- 允许将存储复制到最低层选择
- 允许 Live Volume 自动交换角色
- 将 Live Volume 还原为复制
- 暂停 Live Volume
- 恢复已暂停的 Live Volume
- 为 Live Volume 设置阈值警报定义
- 删除 Live Volume
- 手动使主要 Live Volume 联机
- 强制删除 Live Volume
- 使用自动故障转移修改 Live Volume
- Live Volume ALUA
- 监测 Live Volume
- Storage Center DR 准备和激活
- 查看 Storage Center 信息
- Storage Center 监测
- Storage Center 报告
- Data Collector 管理
- Data Collector 用户管理
- SupportAssist 管理
使用 Unisphere Central 注册服务器
向 Unisphere Central 注册物理或虚拟服务器,以简化存储配置过程。
注册基于 Windows 的服务器
在 Windows 服务器上注册 Storage Manager Server Agent,以便在服务器视图中对其进行管理。
前提条件
Storage Manager Server Agent 必须在该服务器上安装和运行。
步骤
1. 如果从 Unisphere Central 下拉列表中选择了 Storage Center,请单击 (主页)。
此时,将显示 Unisphere Central 主页。
2. 从
存储菜单中,单击服务器。
此时会显示服务器视图。
3. 单击已注册的服务器选项卡。
4. 单击 (新建),然后选择添加 Windows Server Agent。
此时,添加 Windows Server Agent 对话框会打开。
5. 在主机或 IP 地址字段中输入 Windows 服务器的主机名或 IP 地址。
注: 如果该服务器是某个服务器群集的成员,则输入该服务器(而非服务器群集)的主机名或 IP 地址。
6. 在端口字段中输入 Server Agent 上的套接字侦听端口的端口号。
7. 输入连接超时值(以秒为单位)。
8. 为服务器所连接的 Storage Center 配置自动管理设置。
● 要在 Storage Center 上自动创建和管理服务器,请选中自动管理 Storage Center 复选框。
● 要自动创建和管理由 Storage Center 上的服务器托管的虚拟机,请选中自动管理 Storage Center 上的虚拟机。
注: 如果服务器包含物理 iSCSI HBA,Unisphere Central 可能不会自动识别该服务器的 WWN。在这种情况下,配置 iSCSI
HBA 将 Storage Center 作为目标,在 Storage Center 上创建服务器,然后手动将 Storage Center 服务器映射到 Server
Agent。
9. 在文件夹导航树中选择该服务器的父文件夹。
10. 单击确定。
注册 VMware vSphere ESXi 服务器
注册 VMware vCenter Server,以便在服务器视图中对其进行管理。
步骤
1. 如果从 Unisphere Central 下拉列表中选择了 Storage Center,请单击
(主页)。
此时,将显示 Unisphere Central 主页。
2. 从 存储菜单中,单击服务器。
此时会显示服务器视图。
3. 单击已注册的服务器选项卡。
4. 单击 (新建),然后选择添加 VMware vSphere ESXi 主机。
此时,添加 VMware vSphere ESXi 主机对话框会打开。
5. 在主机或 IP 地址字段中输入 Windows 服务器的主机名或 IP 地址。
注: 如果该服务器是某个服务器群集的成员,则输入该服务器(而非服务器群集)的主机名或 IP 地址。
6. 输入服务器上管理用户的用户名和密码。
7. 选中 HTTPS 复选框以使用 HTTPS 连接到服务器。
Storage Center 服务器管理 107