Administrator Guide
Table Of Contents
- 关于本指南
- Unisphere 和 Unisphere Central 2020 R1 管理员指南
- Unisphere 概览
- 使用入门
- Storage Center 概览
- Storage Center 部署
- Storage Center 管理
- Storage Center 服务器管理
- Storage Center 维护
- 管理 Storage Center 设置
- 配置 Storage Center 以继承设置
- 管理 Storage Center 用户和组
- 用户权限级别
- 用户组
- 用户帐户管理和验证
- 管理本地 Storage Center 用户
- 创建本地 Storage Center 用户
- 配置新 Storage Center 用户的默认用户首选项
- 增加本地 Storage Center 用户的权限级别
- 更改本地 Storage Center 用户的会话超时
- 更改 Storage Center 用户的首选语言
- 启用或禁用本地 Storage Center 用户的访问
- 修改本地 Storage Center 用户的本地组成员资格
- 配置本地 Storage Center 用户的首选项
- 修改关于本地 Storage Center 用户的描述性信息
- 更改本地 Storage Center 用户密码
- 删除本地 Storage Center 用户
- 还原删除的本地 Storage Center 用户
- 管理本地 Storage Center 用户组
- 管理本地 Storage Center 用户密码要求
- 启用目录服务验证
- 管理目录服务用户
- 管理目录用户组
- 管理前端 I/O 端口
- 管理后端 I/O 端口硬件
- 使用容错域对 Fibre Channel I/O 端口分组
- 使用容错域对 iSCSI I/O 端口分组
- 使用容错域对 SAS I/O 端口分组
- 管理磁盘和磁盘文件夹
- 管理安全数据
- 管理数据冗余
- 管理磁盘机柜
- 管理 Storage Center 控制器
- 更新 Storage Center
- 关闭和重新启动 Storage Center
- 管理现场可更换单元 (FRU)
- 远程 Storage Center 和复制 带宽控制
- Storage Center 复制和 Live Volume
- Storage Center 复制
- Storage Center Live Volume
- Live Volume 要求
- Live Volume 类型
- Live Volume 角色
- Live Volume 自动故障转移
- Live Volume 的受管复制
- 创建 Live Volume
- 修改 Live Volume
- 交换 Live Volume 的主要 Storage Center
- 取消 Storage Center 角色交换
- 更改 Live Volume 的传输类型
- 更改同步 Live Volume 的同步模式
- 向 Live Volume 添加受管复制
- 包含活动快照数据
- 为 Live Volume 启用或禁用重复数据消除
- 更改 Live Volume 的带宽控制
- 配置 Live Volume 以将数据写入到目标的最低层
- 允许将存储复制到最低层选择
- 允许 Live Volume 自动交换角色
- 将 Live Volume 还原为复制
- 暂停 Live Volume
- 恢复已暂停的 Live Volume
- 为 Live Volume 设置阈值警报定义
- 删除 Live Volume
- 手动使主要 Live Volume 联机
- 强制删除 Live Volume
- 使用自动故障转移修改 Live Volume
- Live Volume ALUA
- 监测 Live Volume
- Storage Center DR 准备和激活
- 查看 Storage Center 信息
- Storage Center 监测
- Storage Center 报告
- Data Collector 管理
- Data Collector 用户管理
- SupportAssist 管理
6. 单击 (更多操作)并选择取消交换主要 Storage Center。
此时将打开确认对话框。
7. 检查信息并单击确定。
更改 Live Volume 的传输类型
可以更改 Live Volume 所使用的复制传输类型,而不中断服务。
前提条件
如果 Live Volume 管理同步复制,则该 Live Volume 的复制传输类型必须是异步。
步骤
1. 单击
主页菜单。
此时,将显示 Unisphere Central 主页。
如果从 Unisphere Central 下拉列表中选择了 Storage Center,请单击
(主页)。
2. 从 数据移动性菜单中,单击复制和 Live Volume。
3. 单击 Live Volume 选项卡。
4. 选择要编辑的 Live Volume,然后单击 (编辑)。
此时编辑 Live Volume 对话框会打开。
5. 从传输类型下拉菜单中选择异步或同步。
6. 单击确定。
更改同步 Live Volume 的同步模式
可以更改 Live Volume 的同步模式,而不会中断服务。
前提条件
Live Volume 必须是同步 Live Volume。
步骤
1. 单击
主页菜单。
此时,将显示 Unisphere Central 主页。
如果从 Unisphere Central 下拉列表中选择了 Storage Center,请单击 (主页)。
2. 从 数据移动性菜单中,单击复制和 Live Volume。
3. 选择 Live Volume 选项卡。
4. 选择要编辑的 Live Volume,然后单击
(编辑)。
此时编辑 Live Volume 对话框会打开。
5. 从同步模式下拉菜单中选择高可用性或高一致性。
6. 单击确定。
向 Live Volume 添加受管复制
向 Live Volume 添加受管复制以将主要卷复制到第三 Storage Center。
前提条件
主要、次要和受管复制目标 Storage Center 必须满足受管复制要求。
220 Storage Center 复制和 Live Volume