Administrator Guide
Table Of Contents
- 关于本指南
- Unisphere 和 Unisphere Central 2020 R1 管理员指南
- Unisphere 概览
- 使用入门
- Storage Center 概览
- Storage Center 部署
- Storage Center 管理
- Storage Center 服务器管理
- Storage Center 维护
- 管理 Storage Center 设置
- 配置 Storage Center 以继承设置
- 管理 Storage Center 用户和组
- 用户权限级别
- 用户组
- 用户帐户管理和验证
- 管理本地 Storage Center 用户
- 创建本地 Storage Center 用户
- 配置新 Storage Center 用户的默认用户首选项
- 增加本地 Storage Center 用户的权限级别
- 更改本地 Storage Center 用户的会话超时
- 更改 Storage Center 用户的首选语言
- 启用或禁用本地 Storage Center 用户的访问
- 修改本地 Storage Center 用户的本地组成员资格
- 配置本地 Storage Center 用户的首选项
- 修改关于本地 Storage Center 用户的描述性信息
- 更改本地 Storage Center 用户密码
- 删除本地 Storage Center 用户
- 还原删除的本地 Storage Center 用户
- 管理本地 Storage Center 用户组
- 管理本地 Storage Center 用户密码要求
- 启用目录服务验证
- 管理目录服务用户
- 管理目录用户组
- 管理前端 I/O 端口
- 管理后端 I/O 端口硬件
- 使用容错域对 Fibre Channel I/O 端口分组
- 使用容错域对 iSCSI I/O 端口分组
- 使用容错域对 SAS I/O 端口分组
- 管理磁盘和磁盘文件夹
- 管理安全数据
- 管理数据冗余
- 管理磁盘机柜
- 管理 Storage Center 控制器
- 更新 Storage Center
- 关闭和重新启动 Storage Center
- 管理现场可更换单元 (FRU)
- 远程 Storage Center 和复制 带宽控制
- Storage Center 复制和 Live Volume
- Storage Center 复制
- Storage Center Live Volume
- Live Volume 要求
- Live Volume 类型
- Live Volume 角色
- Live Volume 自动故障转移
- Live Volume 的受管复制
- 创建 Live Volume
- 修改 Live Volume
- 交换 Live Volume 的主要 Storage Center
- 取消 Storage Center 角色交换
- 更改 Live Volume 的传输类型
- 更改同步 Live Volume 的同步模式
- 向 Live Volume 添加受管复制
- 包含活动快照数据
- 为 Live Volume 启用或禁用重复数据消除
- 更改 Live Volume 的带宽控制
- 配置 Live Volume 以将数据写入到目标的最低层
- 允许将存储复制到最低层选择
- 允许 Live Volume 自动交换角色
- 将 Live Volume 还原为复制
- 暂停 Live Volume
- 恢复已暂停的 Live Volume
- 为 Live Volume 设置阈值警报定义
- 删除 Live Volume
- 手动使主要 Live Volume 联机
- 强制删除 Live Volume
- 使用自动故障转移修改 Live Volume
- Live Volume ALUA
- 监测 Live Volume
- Storage Center DR 准备和激活
- 查看 Storage Center 信息
- Storage Center 监测
- Storage Center 报告
- Data Collector 管理
- Data Collector 用户管理
- SupportAssist 管理
5. 单击确定。
删除多个阈值定义
如果不再需要多个阈值定义,您可将其删除。
步骤
1. 如果您已连接到 Data Collector 并从 Unisphere Central 下拉列表中选择了 Storage Center,请单击
(主页)。
此时,将显示 Unisphere Central 主页。
2. 从 监测菜单中,单击阈值。
此时会显示阈值视图。
3. 单击定义选项卡。
4. 使用 Shift 键 + 单击或 Control 键 + 单击以选择要移除的阈值定义。
5. 单击
(删除)。
此时会打开设置阈值警报定义对话框。
6. 单击确定。
为阈值定义分配存储对象
您可以通过添加或删除通过阈值定义监测的存储对象。
将存储对象分配到阈值定义
将存储对象添加到阈值定义以监测存储对象。
关于此任务
不能将存储对象添加到选中了所有对象复选框的阈值定义。
步骤
1. 如果从 Unisphere Central 下拉列表中选择了 Storage Center,请单击
(主页)。
此时,将显示 Unisphere Central 主页。
2. 从
监测菜单中,单击阈值。
此时会显示阈值视图。
3. 单击定义选项卡。
4. 选择要为其分配存储对象的阈值定义。
5. 单击添加对象。
此时,添加对象向导会打开。
6. 选择要分配到阈值定义的存储对象。
7. 单击下一步。
将显示摘要页。
8. 单击完成。
从阈值定义中取消分配存储对象
从阈值定义中删除存储对象以停止监测存储对象。
关于此任务
不能从选中了所有对象复选框的阈值定义中删除存储对象。
264 Storage Center 监测