Administrator Guide
The Replication Tasks page appears. This step appears only if Replication is licensed.
15 Set the Replication options for the new volume.
• To create the volume without setting up a replication, select No Replication or Live Volume.
• To create a volume as a replication, select Replication Volume to Another Storage Center.
• To create the volume as a Live Volume, select Create as Live Volume.
16 Click Next.
The Volume Summary page opens.
17 Click Finish.
Create Multiple Volumes Simultaneously Using Single-Step Dialog
If you need to create many volumes, you can streamline the process by creating multiple volumes at a time.
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Storage tab.
3 In the Storage tab navigation pane, select Volumes.
4 In the right pane, click Create Multiple Volumes. The Create Volume dialog box opens.
5 Use the Create Volume dialog box to congure the base volume parameters.
a In the Volume Count eld, type the number of volumes to create.
b In the Base Volume Name eld, type a base name for the volumes. Each volume is named with a combination of the base name
and the volume number.
c In the Size eld, type a size for the volumes in kilobytes (KB), megabytes (MB), gigabytes (GB), or terabytes (TB).
NOTE
: A volume with a congured size greater than half the supported maximum volume size, as dened in the
Storage Center Release Notes, does not support view volumes.
d In the Volume Folder pane, select the parent folder for the volumes.
e In the Notes eld, type any notes you want to associate with these volumes.
f (Optional) Congure the remaining volume attributes as needed.
• To schedule snapshot creation and expiration for the volume, apply one or more Snapshot Proles by clicking Change across
from Snapshot Proles.
• To map the volume to a server, click Change across from Server.
• If Chargeback is enabled, select the department to charge for storage costs associated with the volume by clicking Change
across from Chargeback Department.
• If Data Reduction is enabled on the Storage Center, select Compression or Deduplication with Compression to enable Data
Reduction on the volume.
• To use specic disk tiers and RAID levels for volume data, select the appropriate Storage Prole from the Storage Prole
drop-down menu. Using the Recommended Storage Prole allows the volume to take full advantage of data progression.
• If more than one Storage Type is dened on the Storage Center, select the Storage Type to provide storage from the
Storage Type drop-down menu.
• To set a Volume QoS Prole, either accept the default QoS Prole or click Change across from Volume QoS Prole. Then
select a Volume QoS prole from the resulting list, and click OK.
• To set a Group QoS Prole, click Change across from Group QoS Prole. Then select a Group QoS prole from the resulting
list, and click OK.
• To adjust the Read/Write Cache, enter the desired size of the cache.
• To congure Replications and Live Volumes if they are licensed, select Replications and Live Volumes.
g Click OK. The Create Multiple Volumes dialog box opens and displays the volume you created in the previous step.
6 Use the Create Multiple Volumes dialog box to create additional volumes.
• To add a volume based on a previous volume, select the volume from the list, then click Clone Selected Volume.
• To manually dene another volume, click Add Volume.
• To modify an individual volume, select the volume from the list, then click Edit Volume.
Storage Center Administration
111