Administrator Guide
• To remove an individual volume, select the volume from the list, then click Remove Volume.
7 When you are nished, click OK.
Create Multiple Volumes Simultaneously Using the Multiple-Step Wizard
If you need to create many volumes, you can streamline the process by creating multiple volumes at a time. The multiple-step wizard is the
default way to create volumes for the SCv2000 series controllers, and the only method available for direct connect SCv2000 series
controllers to create multiple volumes simultaneously.
1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.
2 Click the Storage tab.
3 In the Storage tab navigation pane, select Volumes.
4 In the right pane, click Create Multiple Volumes.
The Create Multiple Volumes wizard opens.
5 In the Volume Identication page, specify the number of volumes to create, a base name, and notes, and select a folder for the
volumes.
a In the volume count eld, type the number of volumes.
b In the base volume name eld, type the base name for the volumes. Each volume is named with a combination of the base name
and the volume number.
c (Optional) In the notes eld, type any notes associated with the volumes.
d In the volume folder pane, specify the desired location of the volumes. All volumes created will by default be placed in this folder.
You can change this setting in the summary page before the wizard actually creates the volumes.
e (Optional) To create a new folder, click Create New Folder.
The Create Volume Folder dialog box opens.
6 Click Next.
The Specify Capacity page opens.
7 In the Specify Capacity page, specify the size of the volumes and optionally set threshold denitions.
a In the size eld, type the desired size of the volumes in bytes, kilobytes (KB), gigabytes (GB), or terabytes (TB).
NOTE
: A volume with a congured size greater than half the supported maximum volume size, as dened in the
Storage Center Release Notes, does not support view volumes.
b (Optional) To select threshold denitions, click Select Threshold Denition. This option is not available for SCv2000 or
SCv3000 series controllers.
The Set Threshold Alert Denitions dialog box opens.
8 Click Next.
The Storage Options pane opens.
9 In the Storage Options page, specify the storage options for the volumes.
• To schedule snapshot creation and expiration for the volume, apply one or more Snapshot Proles by clicking Change across from
Snapshot Proles.
• To map the volume to a server, click Change across from Server.
• If Chargeback is enabled, select the department to charge for storage costs associated with the volume by clicking Change across
from Chargeback Department.
• If Data Reduction is enabled on the Storage Center, select Compression or Deduplication with Compression to enable Data
Reduction on the volume.
• To use specic disk tiers and RAID levels for volume data, select the appropriate Storage Prole from the Storage Prole drop-
down menu. Using the Recommended Storage Prole allows the volume to take full advantage of data progression.
• If more than one Storage Type is dened on the Storage Center, select the Storage Type to provide storage from the Storage
Type drop-down menu.
• To set a Volume QoS Prole, either accept the default QoS Prole or click Change across from Volume QoS Prole. Then select a
Volume QoS prole from the resulting list, and click OK.
• To set a Group QoS Prole, click Change across from Group QoS Prole. Then select a Group QoS prole from the resulting list,
and click OK.
112
Storage Center Administration