Administrator Guide

ManualsBrandsDell ManualsCompellent (SCStorage SCv2000

141

142

143

144

145

146

147

148

149

150

4 In the right pane, click the Remote Expiration Rules tab.

5 Right-click the remote expiration rule to modify and select Edit Remote Snapshot Expiration.

The Edit Remote Snapshot Expiration dialog box opens.

6 Congure the remote snapshot expiration rule.

a In the Remote Expiration eld, specify the number of minutes, hours, days, or weeks to keep the remote snapshot before

deleting it.

b Click OK.

Managing Storage Proles

Storage Proles determine the RAID level and tiers on which data is stored.

NOTE: For user interface reference information, click Help.

Create a Storage Prole (Storage Center 7.2.1 and Earlier)

Create a storage prole to specify custom RAID level and tier settings that can be applied to one or more volumes.

Prerequisite

In the Storage Center User Volume Defaults, the Allow Storage Prole selection checkbox must be selected.

About this task

NOTE

: SCv2000 series controllers cannot create storage proles.

Steps

1 If the Storage Manager Client is connected to a Data Collector, select a Storage Center from the Storage view.

2 Click the Storage tab.

3 In the Storage tab navigation pane, select the Storage Proles node.

4 In the right pane, click Create Storage Prole.

The Create Storage Prole dialog box opens.

5 Congure the storage prole.

a Type a name for the storage prole in the Name eld.

b Select the RAID levels to use for volumes associated with the storage prole from the RAID Type Used drop-down menu.

c In the Storage Tiers area, select the checkboxes of the storage tiers (disk classes) that can be used for volumes associated with

the storage prole.

6 Click OK.

Create a Storage Prole (Storage Center 7.2.10 and Later)